Many Gulf water supplies are hard or carry sediment from storage tanks. Over a season, minerals and dirt block fine nozzles, reduce pressure and wear pump seals. A short service before summer prevents most problems.
Pre-summer checklist
- Filters: replace sediment and scale-inhibitor cartridges; check the high-pressure inline filter.
- Nozzles: run each zone and look for weak or uneven spray; soak blocked nozzles in cleaner and refit.
- Pump: check oil level and colour, look for leaks, confirm operating pressure on the gauge.
- Lines: flush lines through the end drain; check fittings for leaks and UV damage.
- Controls: test timers, sensors and remotes; check humidity and temperature set points.
- Hygiene: for hospitality sites, flush lines after long idle periods.
When to call for service
- Pressure lower than normal or fluctuating.
- Dripping nozzles or wet floors.
- Pump noisy, hot or leaking oil.
Our annual maintenance contracts include pre-summer service, periodic visits and spares.