Misting · Fogging · Dust suppression · Qatar & GCC
Cooler, cleaner industrial environments. Engineered for Gulf conditions.
TrueMIST mist cooling, dust suppression, adiabatic pre-cooling and humidification systems — designed, supplied, installed and maintained across Qatar and the GCC by S Flo Trading and Contracting WLL.
- Oil & gas, cement, steel, mining, power
- Design · supply · install · AMC
- Associates across the GCC

Solutions
Problems we solve
Choose the challenge on your site. Each pathway explains the approach, equipment and next step.
Heat & cooling
Patios, venues, factories and work areas.
ExploreAirborne dust
Crushers, conveyors, stockpiles and sites.
ExploreOdours
Waste, treatment and processing sites.
ExploreLow humidity
Textiles, printing, storage, greenhouses.
ExploreChillers losing capacity
Adiabatic pre-cooling for condensers.
ExploreWorker heat stress
Cooling stations and rest areas.
ExploreIndustries
Built for heavy industry
Mist cooling, dust suppression, humidification and pre-cooling for the Gulf’s most demanding sites.
About TrueMIST
One engineering partner from survey to service
TrueMIST misting and fogging systems are marketed in the GCC by S Flo Trading and Contracting WLL, Doha. We design and deliver mist cooling, adiabatic, dust suppression, humidification and odour control projects — with associates in Bahrain, the UAE, Saudi Arabia and across the region.
- High, mid and low-pressure systems
- Timers, sensors, zoning and remote monitoring
- Filtration and scale control for GCC water
- Installation, AMC and spares from Doha

Systems & components
Equipment we supply

Misting & fogging pumps
Low, mid and high-pressure units.
Explore
Misting nozzles
Stainless and brass, anti-drip.
Explore
Misting fans
Wall, pedestal and industrial.
Explore
Fog cannons
Long-throw dust control.
Explore
Tubing
Nylon, stainless and copper.
Explore
Filters
Sediment, inline and scale control.
Explore
Fittings & controls
Timers, sensors and remote control.
Explore
Adiabatic kits
Chiller and condenser pre-cooling.
ExploreHow we work
From site survey to after-sales support
Survey & brief
We review the area, climate, water, power and the problem you need to solve — on site or from photos and drawings.
Engineering design
Pump size, pressure, nozzle type and spacing, line routing, filtration and controls are selected for your site.
Supply & installation
Our team installs and commissions the system, tests every zone and trains your operators.
Maintenance & spares
Scheduled AMC visits, filters, nozzles and pump spares keep the system performing season after season.
See it working
Mist cooling in action
High-pressure pumps push filtered water through fine nozzles. The mist evaporates almost instantly, cooling the air without wetting people or surfaces — and the same principle captures dust and odour.
- Up to 10–12 °C cooler in hot, dry conditions
- Low water and power use
- Also settles dust and deters insects
Why TrueMIST
Engineered for Gulf heat, dust and hard water
Designed per site
No off-the-shelf guesswork — layouts are sized for your area and conditions.
High-pressure expertise
Low, mid and high-pressure systems, matched to the job.
Water treatment built in
Filtration and scale control for GCC water supplies.
Smart controls
Timers, temperature and humidity sensors, zones and remote monitoring.
Local installation & AMC
Installation, commissioning and maintenance from our Doha team.
GCC-wide delivery
Projects in Qatar, the UAE, Saudi Arabia, Bahrain, Oman and Kuwait.
Coverage
Serving projects across the GCC
Head office and project team in Doha, with associates in Bahrain, the UAE and Saudi Arabia.
FAQ
Frequently asked questions
What does S Flo Trading and Contracting do?
S Flo Trading and Contracting WLL markets TrueMIST misting and fogging systems and undertakes mist cooling, adiabatic, dust suppression, humidification and related projects across the GCC, with a focus on heavy industry.
Does mist cooling work in humid coastal cities such as Doha, Dubai or Dammam?
Yes, but the effect depends on how dry the air is. Cooling is strongest in hot, dry inland conditions (often 8–12 °C at the right droplet size). On humid summer days the drop is smaller, so we use finer nozzles, air movement from misting fans and humidity sensors that pause the system when evaporation would be poor.
Will the mist make people, floors or equipment wet?
A correctly designed high-pressure system produces droplets of roughly 10–20 microns that evaporate before they settle. Wetting usually comes from oversized nozzles, low pump pressure, poor drainage of the line or running the system when the air is already very humid — all of which we design out with nozzle selection, anti-drip valves and humidity-based controls.
What water quality does a misting system need?
Fine nozzles need clean, filtered water. In most GCC sites we fit sediment and inline filters and, where water is hard, a scale-inhibiting filter or an RO supply. Treated water protects nozzles and pumps and keeps maintenance predictable.
Do you supply and install outside Qatar?
Yes. S Flo Trading and Contracting WLL is based in Doha and delivers TrueMIST projects across the GCC, working with associates in Bahrain, the UAE and Saudi Arabia and supporting projects in Oman and Kuwait. Share your location and we will confirm the delivery and installation route.
What information do you need for a quotation?
The area or length to be treated, whether it is indoor or outdoor, the main problem (heat, dust, odour or humidity), available water and power, mounting options and a few photos or a layout drawing. A site survey is arranged for larger or industrial projects.
Next step
Tell us about your site — we will recommend the right system
Share the area, the problem (heat, dust, odour or humidity) and a few photos. Our engineers reply with a recommended approach, layout and budget estimate — usually within one working day.






