Skip to content
Mist cooling · Dust suppression · Fogging · Humidification — Qatar & GCC

FAQ

Frequently asked questions

Quick answers about how misting and fogging systems work, what they need and how projects run.

  • Site survey & system design
  • Supply, installation & AMC
  • Qatar & GCC coverage

FAQ

Mist cooling basics

How does a misting system cool the air?

Water is pumped at high pressure through fine nozzles. The tiny droplets evaporate and absorb heat from the air (evaporative cooling), lowering the temperature in the misted zone.

What is the difference between misting and fogging?

Both atomise water. “Fog” usually means smaller droplets from higher pressure or special nozzles, used for humidification, dust and indoor work; “mist” is the common term for outdoor cooling.

Does mist cooling work in humid coastal cities such as Doha, Dubai or Dammam?

Yes, but the effect depends on how dry the air is. Cooling is strongest in hot, dry inland conditions (often 8–12 °C at the right droplet size). On humid summer days the drop is smaller, so we use finer nozzles, air movement from misting fans and humidity sensors that pause the system when evaporation would be poor.

Will the mist make people, floors or equipment wet?

A correctly designed high-pressure system produces droplets of roughly 10–20 microns that evaporate before they settle. Wetting usually comes from oversized nozzles, low pump pressure, poor drainage of the line or running the system when the air is already very humid — all of which we design out with nozzle selection, anti-drip valves and humidity-based controls.

FAQ

Dust and odour control

Which dust suppression system is right for my site?

Fixed misting or dry fog at crushers, conveyors and transfer points; fog cannons for stockpiles, demolition and large yards. Most plants use a combination.

Can misting control odours?

Yes, especially with a dosed neutralising agent, at waste transfer, treatment and compost sites.

FAQ

Water, maintenance and service

What water quality does a misting system need?

Fine nozzles need clean, filtered water. In most GCC sites we fit sediment and inline filters and, where water is hard, a scale-inhibiting filter or an RO supply. Treated water protects nozzles and pumps and keeps maintenance predictable.

How much maintenance does the system need?

Routine work is simple: check and replace filter cartridges, inspect and clean nozzles, check pump oil and pressure, and test controls before the summer peak. We offer annual maintenance contracts (AMC) with scheduled visits and spare parts.

Do you offer annual maintenance contracts?

Yes — AMC plans with pre-summer service, periodic visits and priority spares.

FAQ

Projects and quotations

What information do you need for a quotation?

The area or length to be treated, whether it is indoor or outdoor, the main problem (heat, dust, odour or humidity), available water and power, mounting options and a few photos or a layout drawing. A site survey is arranged for larger or industrial projects.

Do you supply and install outside Qatar?

Yes. S Flo Trading and Contracting WLL is based in Doha and delivers TrueMIST projects across the GCC, working with associates in Bahrain, the UAE and Saudi Arabia and supporting projects in Oman and Kuwait. Share your location and we will confirm the delivery and installation route.

Do you show prices online?

No. Every system depends on area, pressure, controls and installation conditions, so we quote per project after understanding the site.

Next step

Tell us about your site — we will recommend the right system

Share the area, the problem (heat, dust, odour or humidity) and a few photos. Our engineers reply with a recommended approach, layout and budget estimate — usually within one working day.